IBM THINKPAD310 Laptop DC Adapter < IBM < Laptop Laptop DC Adapter < Battery Store
A new IBM THINKPAD310 battery charger usually maintains a discharged condition with very low capacity. It is highly recommended to fully charge new THINKPAD310 charger packs before using. You can refer to the users' guide of your electronic device for charging instructions.
A new IBM Laptop DC Adapter pack needs to be circled (fully discharged and recharged) three to five times to reach its optimum performance.
Rechargeable THINKPAD310 Laptop DC Adapter will undergo self-discharging when left unused for a long period of time. Thus, it should always be stored in a fully charged state and kept in a cool, dry and clean place.
To maintain the optimum performance of a IBM THINKPAD310 charger pack, it is highly recommended to circle (fully discharging and recharging) it at least once a month.
It is normal if a new THINKPAD310 Laptop DC Adapter gets warm when being charged or used. However, please pay special attention if the IBM Laptop DC Adapter pack becomes excessively hot. This may indicate there is a problem with the charging circuit of the electronic device. Please consult a qualified technician if necessary.
New IBM THINKPAD310 Laptop DC Adapter are hard to be charged. Sometimes, your electronic device may indicate a fully charged condition about 10 to 15 minutes when the new battery pack is being charged for the first time. When this happens, remove the battery pack and let it cool down for about 10 to 15 minutes then repeat the charging procedure. Sometimes, a new THINKPAD310 battery charger will suddenly refuse to be charged. If this happens, a suggested solution is trying to remove the battery from the device and insert it again.
Laptop Battery / Camcorder Battery / Battery Charger / PDA Battery / AC(DC) Adapter / Other / other battery seller
All offers and prices are subject to charge without prior notice.
